M-Series End Cutters
M-205 Semi-Automatic Heavy Duty End Cutter
Maimin Technology is proud to introduce the M-205 Semi-Automatic Heavy Duty End Cutter. Featuring a touch screen operator interface, variable speed motor control and linear ball bearing track system, the M-205 is the most accurate and versatile end cutter available. The M-205 can be manufactured for any length cutting track (12 foot featured in the video below) and can work with any Maimin cutting machine.
The touch screen allows the operator to control cut length and speed and features a ply counter, countdown function, and a lifetime counter. The program also allows the operator to select the sharpen function to automatically turn on the knife for sharpening.
The variable speed motor control enables the operator (this feature may be password protected for management only) to control the speed in which the machine is sent across the track. Adjusting this speed can allow for accurate cutting of thicker lies (more plies at once) and more difficult to cut industrial fabrics.
The track can be manufactured in any length specified. The cutting track is manufactured using a high precision linear ball bearing rail system. This provides the base for the smoothest and most accurate cutting across the whole track.
Click on the video below to view the new M-205 End cutter.
M-105 Manual Heavy Duty End Cutter
Maimin is proud to introduce our newest newest line of end cutter machines. The Maimin model M-105 heavy duty end cutter operates like the traditional K-105 and adds a linear ball bearing rail for stability and accuracy. Like the K-105, an end-rail holds the fabric, allowing the operator to quickly and accurately cut the fabric along the cutting rail at the other end of the lay. Each ply receives a right angle cut at the same length, and the system is adjustable to any length of lay.
With the addition of the linear ball bearing rail, we are able to mount any cutting machine to the rail giving you the ability to cut just about any type of fabric, synthetic, non-woven or other industrial material.
The cutting machine is mounted inside a heavy duty aluminum track and is secured to the linear rail with two ball bearing blocks. The stability and accuracy of this system in unmatched with any other end cutting system available.
As with traditional end cutting systems, the track is mounted to lifters on either side of the table allowing the operator to lift and lower the track to secure the cut material in place.
The M-105 system is also available with an automatic-on home position switch. When the operator pulls the machine from the home position, the machine automatically starts and is immediately ready for cutting. This feature eliminates the need for a handle switch that must be held by the operator during the cut cycle (eliminating operator fatigue). When the machine is moved back into the home position, the machine automatically turns off. The main power switch will override the system allowing the operator to turn off the machine at any time.
The M-105 can be manufactured for any cutting width. It can be mounted on a traditional cutting table as well as floor mounted. It is available with any Maimin round knife cutting machine and may be configured for 110v or 220v operation.
Contact Information:
Maimin Technology Group, Inc.
Toll Free: (800) 243-4645
Telephone: (847) 263-8200
Fax: (847) 263-8299
Mailing Address:
Maimin Technology Group, Inc.
227 Ambrogio Drive, Unit B
Gurnee, Illinois 60031
E-mail Contact: