HC-530
The Model HC-530 is our most popular and best selling model strip cutter. It is designed to cut elastic, webbing (up to 1/4" thick), ribbons, belt loops, velcro, nylon cords, leather, safety belts, rubber and vinyl (among many others). This model comes standard with our safety
knife cover sensor and auto-stop roll end sensor. It also may be set for automatic feed and reverse.
Our price: $3,900.00 (link to purchase below)
Specifications:
Power Supply: 110v
Feeding Speed: adjustable up to 13 inches per second
Cutting Length: approximately 40 feet
Cutting Width: 4 inches
Tolerance: 0.05% of total cut
Quantity: Up to 99,999 pieces
Heat maximum: 600 degrees
Advantages of our strip cutters:
The top rollers on all of our strip cutters are gear driven, not pressure driven (springs) like other strip cutters. This exclusive feature means that there is less slippage of material providing more accurate cuts.
The tolerance on our machines is +/- 0.05% of the total cut.
We use only the best Japanese stepper motors available.
We guarantee all parts for one year (including heating elements and knives).
Electronics are guaranteed for two years (unmatched in the industry).
Every one of our machines is simple to operate.
Our machines measure in inches and millimeters.
Affordable replacement parts are kept in stock.
All machines are CE approved.
HC-530A
The Model HC-530A features a 4" blade and dwell timer this machine will cut thru heavy webbing, synthetic cord, cardboard, leather, plastic. This model comes standard with our safety knife cover sensor and auto-stop roll end sensor. It also may be set for automatic feed and reverse.
Our price: $3,900.00 (link to purchase below)
Specifications:
Power Supply: 110v
Pneumatic: Air required
Feeding Speed: adjustable up to 13 inches per second
Cutting Length: approximately 40 feet
Cutting Width: 4 inches
Tolerance: 0.05% of total cut
Quantity: Up to 99,999 pieces
Heat maximum: 600 degrees
Advantages of our strip cutters:
The top rollers on all of our strip cutters are gear driven, not pressure driven (springs) like other strip cutters. This exclusive feature means that there is less slippage of material providing more accurate cuts.
The tolerance on our machines is +/- 0.05% of the total cut.
We use only the best Japanese stepper motors available.
We guarantee all parts for one year (including heating elements and knives).
Electronics are guaranteed for two years (unmatched in the industry).
Every one of our machines is simple to operate.
Our machines measure in inches and millimeters.
Affordable replacement parts are kept in stock.
All machines are CE approved.
HC-530T
The Model HC-530T combines our most popular and best selling model strip cutter with a built-in tool box. It is designed to cut elastic, webbing (up to 1/4" thick), ribbons, belt loops, velcro, nylon cords, leather, safety belts, rubber and vinyl (among many others). This model comes standard with our safety knife cover sensor and auto-stop roll end sensor. It also may be set for automatic feed and reverse.
Our price: $4,500.00 (link to purchase below)
Specifications:
Power Supply: 110v
Feeding Speed: adjustable up to 13 inches per second
Cutting Length: approximately 40 feet
Cutting Width: 4 inches
Tolerance: 0.05% of total cut
Quantity: Up to 99,999 pieces
Heat maximum: 600 degrees
Advantages of our strip cutters:
The top rollers on all of our strip cutters are gear driven, not pressure driven (springs) like other strip cutters. This exclusive feature means that there is less slippage of material providing more accurate cuts.
The tolerance on our machines is +/- 0.05% of the total cut.
We use only the best Japanese stepper motors available.
We guarantee all parts for one year (including heating elements and knives).
Electronics are guaranteed for two years (unmatched in the industry).
Every one of our machines is simple to operate.
Our machines measure in inches and millimeters.
Affordable replacement parts are kept in stock.
All machines are CE approved.
HC-530ES
With our Model HC-5030ES you can cut pieces up to 4" wide and 28" long on demand, no more wasted material, only cut what you need. Here is how it works, as the machine cuts a piece of hook & loop or webbing the material slides down the guided track and stops at the edge of the guide, when the operator removes that piece, the sensor (with adjustable delay) sees there is no material in place and will automatically cut another piece. Properly positioned machine can feed 2 operators at the same time. When you don't need the on demand feature the machine converts to a standard HC-530 hot and cold strip cutter.
Our price: $6,600.00 (link to purchase below)
Specifications:
Power Supply: 110v
Feeding Speed: adjustable up to 13 inches per second
Cutting Length: approximately 40 feet
Cutting Width: 4 inches
Tolerance: 0.05% of total cut
Quantity: Up to 99,999 pieces
Heat maximum: 600 degrees
Advantages of our strip cutters:
The top rollers on all of our strip cutters are gear driven, not pressure driven (springs) like other strip cutters. This exclusive feature means that there is less slippage of material providing more accurate cuts.
The tolerance on our machines is +/- 0.05% of the total cut.
We use only the best Japanese stepper motors available.
We guarantee all parts for one year (including heating elements and knives).
Electronics are guaranteed for two years (unmatched in the industry).
Every one of our machines is simple to operate.
Our machines measure in inches and millimeters.
Affordable replacement parts are kept in stock.
All machines are CE approved.
HC-530CD
The HC-530CD was developed specifically for government contractors doing name tags. It replaces an operation currently done by hand. With the highest quality sensors our machines are able to determine different color shades, this feature allows you to cut the webbing 3 to 4 inches before the first letter of a name and 3 to 4 inches after the last letter. The sensitivity of the sensors is adjustable to any color or contrast. Machine available with hot/cold blades.
Our price: $7,900.00 (link to purchase below)
Specifications:
Power Supply: 110v
Feeding Speed: adjustable up to 13 inches per second
Cutting Length: approximately 40 feet
Cutting Width: 4 inches
Tolerance: 0.05% of total cut
Quantity: Up to 99,999 pieces
Heat maximum: 600 degrees
Advantages of our strip cutters:
The top rollers on all of our strip cutters are gear driven, not pressure driven (springs) like other strip cutters. This exclusive feature means that there is less slippage of material providing more accurate cuts.
The tolerance on our machines is +/- 0.05% of the total cut.
We use only the best Japanese stepper motors available.
We guarantee all parts for one year (including heating elements and knives).
Electronics are guaranteed for two years (unmatched in the industry).
Every one of our machines is simple to operate.
Our machines measure in inches and millimeters.
Affordable replacement parts are kept in stock.
All machines are CE approved.
HC-530LS
The HC-530CD was developed specifically for government contractors doing name tags. It replaces an operation currently done by hand. With the highest quality sensors our machines are able to determine different color shades, this feature allows you to cut the webbing 3 to 4 inches before the first letter of a name and 3 to 4 inches after the last letter. The sensitivity of the sensors is adjustable to any color or contrast. Machine available with hot/cold blades.
Our price: $7,900.00 (link to purchase below)
Specifications:
Power Supply: 110v
Feeding Speed: adjustable up to 13 inches per second
Cutting Length: approximately 40 feet
Cutting Width: 4 inches
Tolerance: 0.05% of total cut
Quantity: Up to 99,999 pieces
Heat maximum: 600 degrees
Advantages of our strip cutters:
The top rollers on all of our strip cutters are gear driven, not pressure driven (springs) like other strip cutters. This exclusive feature means that there is less slippage of material providing more accurate cuts.
The tolerance on our machines is +/- 0.05% of the total cut.
We use only the best Japanese stepper motors available.
We guarantee all parts for one year (including heating elements and knives).
Electronics are guaranteed for two years (unmatched in the industry).
Every one of our machines is simple to operate.
Our machines measure in inches and millimeters.
Affordable replacement parts are kept in stock.
All machines are CE approved.